Contact Now for Best Quote
B - 14, Maruti Industrial Estate, Phase - 1, G. I. D. C., Vatva, Bombay Conductor Road,
Ahmedabad-382445, Gujarat (India)
+91-79-29294117
+91-9724525135
 
 
 
 
 
 

Efficient Economical Lamination Machine

Present the ultimate Lamination machine -which is easy to handle, install and operate It takes care of Large Quantity of Lamination work in a non-messy & Organized manner.

Salient Features

  • Doctor blade and Nip Roller.
  • Fully insulated glass wool sheet fitted in the panel (Top side & Bottom) for controlling heat loss.
  • One & one slit type air flow arrangement, Divided equally are placed against roller for proper web support.
  • Exhaust Nozzles are equally distributed through-out the length of drying chamber.
  • Digital temperature controller with indicator & PT 100 sensor for each zone Inside heating for Nip steel roller Two roll surface Rewinder with slipping clutch assembly. . SRA Web system for controlling the Web after the Drying tunnel
 

Acculam-1000 Series

WORKING WIDTH600MM TO 1200MM
UNWIND REWIND DIA600MM – 1000MM
MATERIAL TO BE LAMINATELDPE,HDPE,LLDPE,PPCP,HMHDPE,PET FILM(10 micron),BOPP, POLYESTER (10 to 50 micron), FOIL(35 micron), PVC, OPP, PAPER(UPTO 50GSM),  etc.
HOT AIR TEMP50° – 150°C
INSIDE CORE DIA76MM
MAX OPERATING SPEED100 MPM
DOCTOR BLADE PRESSUREMECHANICAL OR PNEUMATIC
IMPRESSION ROLLERPNEUMATIC
HEATING SYSTEMELECTRICAL/HOT AIR
UNWIND TENSION CONTROL10KG POWDER BRAKE WITH LOAD CELL TENSION CONTROL
GUIDING SYSTEMPNEUMO-HYDRO / EDGE GUIDE / LINE GUIDE
 

Acculam-2000 Series

ACCULAM-2000 SERIES

WORKING WIDTH800MM TO 1600MM
UNWIND REWIND DIA600MM – 1000MM
MATERIAL TO BELAMINATE    FIL, FOIL, PAPER
HOT AIR TEMP50° – 150°C
INSIDE CORE DIA76MM
MAX OPERATING SPEED150 MPM
DOCTOR BLADE PRESSUREMECHANICAL OR PNEUMATIC
EXHAUST3 HP
HEATING SYSTEMELECTRICAL/HOT AIR
MAIN DRIVECOATER/NIP - 3 HP, REWIND - 5HP
UNWIND TENSION CONTROL10KG POWDER BRAKE WITH LOAD CELL TENSION CONTROL
GUIDING SYSTEMPNEUMO-HYDRO / EDGE GUIDE / LINE GUIDE
 

Acculam-3000 Series

ACCULAM-3000 SERIES

WORKING WIDTH1000MM TO 2500MM
UNWIND REWIND DIA600MM – 1000MM
MATERIAL TO BELAMINATE    Polyester/Poly/Paper/BOPP/Aluminum Foil/HDPE Fabrics etc.
HOT AIR TEMP50° – 150°- 250°C
INSIDE CORE DIA76MM
MAX OPERATING SPEED200 MPM
DOCTOR BLADE PRESSUREMECHANICAL OR PNEUMATIC
EXHAUST35HP
HEATING SYSTEMELECTRICAL/HOT AIR
SYNCHRONIZE DRIVE5 HP/5 / 7.5,10 / 3 HP for Coater Nip, Rewind & Positive Drive (Optional)
UNWIND TENSION CONTROL10KG POWDER BRAKE WITH LOAD CELL TENSION CONTROL
GUIDING SYSTEMPNEUMO-HYDRO / EDGE GUIDE / LINE GUIDE
 

Rotogravure Printing Machine ARC-10

 

 

Auto Registration Model

No. of Printing station up to:8 color
Max. web width:1500 mm.
Printing materials:-LDPE, HDPE, LLDPE, PPCP, HMHDPE, Pet Film (10 micron) foil (35 Micron) paper (Up to 50 GSM) Polyester (10-20 Micron) BOPP PVC, OPP, paper Etc.
Print repeat rang :-314-1100
Max. Roll Diameter :-800 mm / 500 Kgs.
Max. Operating speedupto 150 /200 Mtrs. / Min.
Web tension range:6-30 Kg,.
Unwind Tension control By means of( Digital Control AC motor)
Inlet compressed Air Pressure 6 bar( Dry & Clean Air )
Rewind tension range6-30 Automatic tension
Unwind slide displacementBy Web Aligner
Doctor blade pressure and Impression roller :Pneumatic
Registration Lateral & Longitudinal :Motorised

Special future

  • Special type quick change over C.I Doctor blade with S.S griper plate.
  • One side thread EN-9 shaft with 40 hardening for main drive cylinder & Shanthi gear ( 50 mm. )
  • Linear registration arrangement with bearing type gear box motorized registration.
  • C.I foundation based one piece for wall mounting ( Printing plate )
  • Timings belt drive arrangement for In-feed / Out-feed main drive & rewind ( Timing belt pulley & belt )
  • Central exhaust pipe between both drying chambers for all stations.
  • Load cell mounting three roll assembly arrangement for multi drive system.
  • Rack & Pinion tray lifting arrangement with gearbox.
  • Suitable fitting arrangement for 5 drive system (unwind /In-feed / out-feed / main drive and rewinding )
  • Individual Air flow separators jet in drying chamber.
  • Inspection provided in all station and rewind.

 

 

 

 

 

Accuprint-1000 Series

ACCUPRINT-1000 SERIES

WORKING WIDTH600MM TO 1200MM
NO. OF PRINTING STATION1 TO 8
PRITING MATERIALLDPE,HDPE,LLDPE,PPCP,HMHDPE,PET FILM(10 micron),BOPP, POLYESTER (10 to 50 micron), FOIL(35 micron), PVC, OPP, PAPER(UPTO 50GSM),  etc.
PRINT REPEAT RANGE314 – 900
MAX UNWIND ROLL DIA1000MM / 500KG
INSIDE CORE DIA   76MM
MAX OPERATING SPEED100 MPM
DOCTOR BLADE PRESSUREMECHANICAL OR PNEUMATIC
IMPRESSION ROLLERPNEUMATIC
HEATING SYSTEMELECTRICAL/HOT AIR
UNWIND TENSION CONTROL10KG POWDER BRAKE WITH LOAD CELL TENSION CONTROL
GUIDING SYSTEMPNEUMO-HYDRO / EDGE GUIDE / LINE GUIDE

OPTIONAL ATTACHMENT :-

  • 3 DRIVE SYSTEM
  • 5 DRIVE SYSTEM WITH INFEED OUTFEED STATION COMPLETE
  • MOTORISED TENSION CONTROL
  • TURNBAR SYSTEM
 

Accuprint-2000 Series

ACCUPRINT-2000 SERIES

WORKING WIDTH800MM TO 1500MM
NO. OF PRINTING STATION1 TO 10
PRITING MATERIALPOLYESTER, BOPP, LD, LLDP, FOIL, PAPER.
PRINT REPEAT RANGE314 – 900
MAX UNWIND ROLL DIA1000MM / 800KG
INSIDE CORE DIA76MM
MAX OPERATING SPEED150 MPM
DOCTOR BLADE PRESSUREMECHANICAL OR PNEUMATIC
IMPRESSION ROLLERPNEUMATIC
HEATING SYSTEMELECTRICAL/HOT AIR/ THERMIC FLUID
UNWIND TENSION CONTROL6 CALIPER BRAKE WITH LOAD CELL TENSION CONTROL
REWIND TENSION CONTROLAUTO TENSION CONTROL THROUGH LOAD CELL
GUIDING SYSTEMPNEUMO-HYDRO / EDGE GUIDE / LINE GUIDE

OPTIONAL ATTACHMENT :-

  • 5 DRIVE SYSTEM WITH INFEED OUTFEED STATION COMPLETE
  • MOTORISED TENSION CONTROL
  • PNEUMATIC AIR SHAFT FOR 3” & 6” CORE ID
  • AUTO REGISTRATION SYSTEM
 

Accuprint-3000 Series

ACCUPRINT-3000 SERIES

WORKING WIDTH1200MM TO 2300MM
NO. OF PRINTING STATION1 TO 12
PRITING MATERIALPAPER, POLYESTER, BOPP, PVC, LDPE, etc.
PRINT REPEAT RANGE900 – 1800
MAX UNWIND ROLL DIA1000MM / 1000KG
INSIDE CORE DIA76MM
MAX OPERATING SPEED250 MPM
DOCTOR BLADE PRESSUREPNEUMATIC
IMPRESSION ROLLERPNEUMATIC
HEATING SYSTEM    THERMICFLUID / GAS
UNWIND TENSION CONTROLTHROUGH DANCE ROLLER AND LOAD CELL FEEDBACK
REWIND TENSION CONTROLAUTO TENSION CONTROL THROUGH LOAD CELL WITH ENCODER FEEDBACK
GUIDING SYSTEM   EDGE GUIDE / LINE GUIDE

OPTIONAL ATTACHMENT :-

  • VIDEOSCOPE
  • AUTO REGISTRATION SYSTEM
  • 7 DRIVE WITH TURRET AND AUTO SPLICING
  • INK CURCULATION SYSTEM.
 

Self Adhesive Tape Plant

ACCUCOAT – SELF~ADHESIVE TAPE PLANT

WORKING WIDTH800MM TO 2000MM
UNWIND REWIND DIA600MM – 1000MM
HOT AIR TEMP50° – 250°C
INSIDE CORE DIA76MM
MAX OPERATING SPEED100 MPM
DOCTOR BLADE PRESSUREMECHANICAL OR PNEUMATIC
EXHAUST3 HP
HEATING SYSTEMELECTRICAL/HOT AIR
MAIN DRIVECOATER/NIP - 3 HP, REWIND - 5HP
UNWIND TENSION CONTROLMECHANICAL CLUTCH
GUIDING SYSTEM1 HP PNEUMO-HYDRAULIC SYSTEM WITH ALL ACCESSORIES

Optional Attachments:

  • Air shaft
  • In-feed drive
  • Ink circulation with viscosity control
  • Programmable exhaust with PID
  • Ultrasonic web guide
 

DG Coating Plant

ACCUCOAT – D.G. COATING PLANT

WORKING WIDTH1000MM TO 2500MM
UNWIND REWIND DIA600MM – 1200MM
MATERIAL TO BE COATEDPOLYESTER, BOPP, PVC, FOIL
HOT AIR TEMP50° – 150°- 250°C
INSIDE CORE DIA76MM
MAX OPERATING SPEED200 MPM
DOCTOR BLADE PRESSUREMECHANICAL OR PNEUMATIC
HEATING SYSTEMHOT AIR GENERATOR/ THERMIC FLUID/ RADIATOR & BLOWER.
Exhaust:7.5 HP (Individual for each zone / programmable optional)
CHILLING ROLL150 DIA
TENSION CONTROLFor unwind & synchronized drive for coater, nip & positive drive
GUIDING SYSTEMPNEUMO-HYDRO / EDGE GUIDE

Optional Attachments:

  • Air shaft
  • In-feed drive
  • Ink circulation with viscosity control
  • Programmable exhaust with PID
  • Ultrasonic web guide
 

Roll Stretch Wrapper Machine

ARW-10

  • Mechanical brake for set tention
  • Reduction gearbox with motor drive for turn table roll assembly
  • 700mm rubber fillet covered roll with mechanical synchronizes drive
  • Pre settable counter for rotation of stretch film,starter for ac motor
 

Stretch Pallet

Model : ASP-10

Accuweb pallet wrapping machine is to secure them to pallet with stretch film. This provides stability and to protect your products during transportaion.
These machines are characterized by less maintanence, superior work easy operate and cost effective prices
The best way to transport your products on a pallet is to secure them to the pallet with Stretch Film. This provides stability and protects your products during transportation.

These machines are characterized by less maintenance, superior work Easy Operate and cost effective prices.
pallet type wrapping machine   

Accu Turntable:

  • Packing height: --as per customer require
  • turntable diameter: 500mm to 1500mm
  • Turntable capacity: 250kgs, 1000kgs
  • 125mm low profile turntable
  • Soft start /soft stop
  • Heavy duty chain drive
  • Turntable speed: variable 3-12rpm
  • Top and bottom & up-down Wrap times adjestable
  • auto carriage up/down switch satable asper require size
  • Supported by 6 pairs of Caster

Electrical :

  • 75/1.5 kw motor for turn table
  • 3.7 kw motor for carriage
  • Power 230 ac/440ac
  • Manual/auto tension brake
  • Variable ac drive for turn table& auto carrige
  • Pre-settable counter for set the turn table rotation
 

Fabric Roll Wrapping Machine

Model : AFW-10

Suitable for packing any rolls of Denim Cloth, Curtain Cloth, Carpets, Foam sheets, Upholsteries, Fabrics, Film, Paper etc.

High productivity 30 - rolls/hour

Tremendous savings in labour, time and money Highly durable dust and moisture proof packing
Capacity

  • Weight/ Roll : 400 kgs
  • Roll Diameter : 600 mm
  • Roll Width: 1800 mm

Machine

  • Roller Height (above GL) : 400 mm
  • Speed : 50 meters/minute
  • Installed Power : 1.5 kW
  • Power Supply : 220V/440

Film Details

  • Material : LLDPE Stretch Film
  • Film Width : 250 to 500 mm
  • Film Thickness core Diameter : 76 mm
  • Maximum Film Diameter : 250 mm
 

Roll Stretch Wrapper Machine (ARW-10 B)

ARW-10 B

The machine is used to pack ROLL/REEL on the stack with PE stretch wrapping film,which makes the goods stable, tidier; moreover, it has waterproof and dust proof effects. And it can lessen the labor density,improve work efficiency, so it is a perfect packing equipment for the modern enterprise

  • Maximum reel width : 700 mm to 2500MM
  • Maximum reel wt. 100 kg T0 300 KG
  • un roll shaft with 1 nos core cone assembly (suitable for 500mm dai)
 

Box Stretch Wrapping Machine

Accu box wrapping machine is widely used for the pharma industries. Box wrapping is basically used to wrapp the bulk products in the box with the stretch film to avoid the dust and damage during transportation from one place to another.

ABW-10

  • Box Size 500 X 500 X 500 MM, Max Load 100 Kgs
  • Mechanical brake for set tention
  • Reduction gearbox with motor drive for turn table roll assembly
  • 700mm rubber fillet covered roll with mechanical synchronizes drive
  • Pre settable counter for rotation of stretch film,starter for ac motor
 

Box Stretch Wrapping Machine (ABW-10 P)

Accu box wrapping machine is widely used for the pharma industries. Box wrapping is basically used to wrapp the bulk products in the box with the stretch film to avoid the dust and damage during transportation from one place to another.

ABW-10 P

  • Box Size 800 x 500 x 800 MM Max Load 200 Kgs
  • Mechanical brake for set tention
  • Reduction gearbox with motor drive for turn table roll assembly
  • 700mm rubber fillet covered roll with mechanical synchronizes drive
  • Pre settable counter for rotation of stretch film,starter for ac motor
 

Paper Inspection Winder

Material To INSPECTPAPER
Web Width1000mm To 2000mm
Unwind DiaUp to 800mm
Rewind DiaUp to 600mm
Rewinding TypeSINGLE SHAFT
Unwind/Rewind Core3” AND 6”
Min Trimming10mm
Machine Speed0-200mpm
Roll Weight500kg
Guiding SystemPneumo Hydraulic / Ultrasonic
Load Cell Tension with Auto ControlOptional
Magnetic Powder Brake (5kg/10kg/15kg/20kg/25kg)Optional
Pneumatic Brake (2caliper/4caliper/6caliper)Optional
 

Inspection Winding Machine

Material To INSPECTWOVEN / NON WOVEN / CARPET
Web Width600mm To 1500mm
Unwind DiaUp to 800mm
Rewind DiaUp to 600mm
Rewinding TypeDuplex Centre Cum Surface
Unwind/Rewind Core1” , 2” and 3”
Min Slitting Width50mm
Machine Speed0-100mpm
Roll Weight500kg
Guiding SystemPneumo Hydraulic / Ultrasonic
Load Cell Tension with Auto ControlOptional
Magnetic Powder Brake (5kg/10kg/15kg/20kg/25kg)Optional
Pneumatic Brake (2caliper/4caliper/6caliper)Optional
 

Paper Inspection Surface Rewinder

Material To INSPECTPAPER
Web Width1000mm To 2000mm
Unwind DiaUp to 800mm
Rewind DiaUp to 600mm
Rewinding TypeSURFACE WINDER
Unwind/Rewind Core3” AND 6”
Min Trimming10mm
Machine Speed0-300mpm
Roll Weight1000kg
Guiding SystemPneumo Hydraulic / Ultrasonic
Load Cell Tension with Auto ControlOptional
Magnetic Powder Brake (5kg/10kg/15kg/20kg/25kg)Optional
Pneumatic Brake (2caliper/4caliper/6caliper)Optional
 

Fabric Inspection Machine

Material To INSPECTALL KIND OF FABRIC
Web Width1000mm To 2000mm
Unwind DiaUp to 800mm
Rewind DiaUp to 600mm
Rewinding TypeSHAFTLESS
Unwind/Rewind Core3” AND 6”
Min Trimming10mm
Machine Speed0-300mpm
Roll Weight1000kg
Guiding SystemPneumo Hydraulic / Ultrasonic
Load Cell Tension with Auto ControlCUSTOMIZED
Magnetic Powder Brake (5kg/10kg/15kg/20kg/25kg)CUSTOMIZED
Pneumatic Brake (2caliper/4caliper/6caliper)CUSTOMIZED
 

Film Inspection Machine

Material To INSPECTALL KIND OF PACKAGING FILM
Web Width600mm To 1500mm
Unwind DiaUp to 800mm
Rewind DiaUp to 600mm
Rewinding TypeSHAFTLESS
Unwind/Rewind Core3” AND 6”
Min TrimmingOPTIONAL
Machine Speed0-300mpm
Roll Weight500kg
Guiding SystemPneumo Hydraulic / Ultrasonic
Load Cell Tension with Auto ControlCUSTOMIZED
Magnetic Powder Brake (5kg/10kg/15kg/20kg/25kg)CUSTOMIZED
Pneumatic Brake (2caliper/4caliper/6caliper)CUSTOMIZED
 

Eco Stretch Film Slitter

Specification

Material To SlittStretch Film and all Flexible Packaging
Web Width600mm To 1500mm
Unwind DiaUp to 800mm
Rewind DiaUp to 600mm
Rewinding TypeDuplex Centre Cum Surface
Unwind/Rewind Core1” , 2” and 3”
Min Slitting Width50mm
Machine Speed0-100mpm
Roll Weight500kg
Guiding SystemPneumo Hydraulic / Ultrasonic
Load Cell Tension with Auto ControlOptional
Magnetic Powder Brake (5kg/10kg/15kg/20kg/25kg)Optional
Pneumatic Brake (2caliper/4caliper/6caliper)Optional
 

Flexible Packaging Slitter

Specification

Material To SlittFlexible Packaging
Web Width600mm To 1500mm
Unwind DiaUp to 800mm
Rewind DiaUp to 600mm
Rewinding TypeDuplex Centre Cum Surface
Unwind/Rewind Core3” and 6”
Min Slitting Width50mm
Machine Speed0-250 mpm
Roll Weight500kg
Guiding SystemPneumo Hydraulic / Ultrasonic / Line Guiding
Load Cell Tension with Auto ControlOptional
Magnetic Powder Brake (5kg/10kg/15kg/20kg/25kg)Optional
Pneumatic Brake (2caliper/4caliper/6caliper)Optional
 

Fabric Slitter Rewinder Machine

Specification

Material To SlittFabric & Non Woven
Web Width1000mm To 3500mm
Unwind DiaUp to 800mm
Rewind DiaUp to 600mm
Rewinding TypeDuplex Centre Cum Surface
Unwind/Rewind Core3” and 6”
Min Slitting Width50mm
Machine Speed0-250 mpm
Roll Weight1000kg
Guiding SystemPneumo Hydraulic / Ultrasonic / Line Guiding
Load Cell with Auto ControlOptional
Magnetic Powder Brake (5kg/10kg/15kg/20kg/25kg)Optional
Pneumatic Brake (2caliper/4caliper/6caliper)Optional
 

Paper Slitter Rewinder Machine

Specification

Material To SlittPaper/Aluminum Foil
Web Width1000mm To 3500mm
Unwind DiaUp to 800mm
Rewind DiaUp to 600mm
Rewinding TypeDuplex Centre Cum Surface
Unwind/Rewind Core3” and 6”
Min Slitting Width50mm
Machine Speed0-250 mpm
Roll Weight1000-3000 kg
Guiding SystemPneumo Hydraulic / Ultrasonic / Line Guiding
Load Cell Auto Tension with Auto ControlOptional
Magnetic Powder Brake (5kg/10kg/15kg/20kg/25kg)Optional
Pneumatic Brake (2caliper/4caliper/6caliper)Optional
 

Duplex Center Shaft Rewinding Machine

This machine is of the Duplex Rewind type and is suited for finish slitting of printed and unprinted rolls of paper, cellophane, laminated paper, supported aluminum foil and other delicate materials.

Salient Feature

  • Unwind with webguide
  • Mechanical or Pneumatic Brake
  • Edge Sensor
  • Nip Roller
  • Dancing Roll
  • Mechanical or Pneumatic Pressing
  • Air Cutting or grove cutting
  • Circular Cutting
  • Lay on Roll
  • Mechanical or Pneumatic Clutch
  • Rewinder
  • Trimming
 

Duplex Center Surface Rewinding Machine

To understand the above techniques, it is necessary to understand the terms "Duplex" Surface Rewinding". The term Duplex Rewinding implies the use of two shafts for Rewinding the slit substrate. This ensures a positive separation between adjacent slit reels, which are wound alternately on the two shafts.

In Surface Rewinding, the web is driven by the winding drum which is always in contact with the outer layer of the material being rewound. Here, it is the winding drum which is driven, also by a motor in most cases.

As is clear by the above definitions, in the case of Center-Surface Rewinding, the winding force is derived from both the Rewind shaft and the contact with the winding drum. Here, both the Rewind shaft and the winding drum are driven by through a clutch mechanism and motor respectively.

The machines using Center-Surface Rewinding technology are simple in construction with a minimal role of electronics and have offered invaluable service to the Flexible Packaging and Converting industry in its nascent stages.
Center-Surface Rewinding technology was commonly used because of its ability to produce large diameter slit reels tight enough to handle the rigors of transportation to the customer. Since the winding drum is not required to transmit increasing torque with the build up in reel diameter, tightness was achieved without the need for complicated drives and controls.

 

Manual Core Cutter

  • The Most efficient core cutting machine
  • It is best semi-automatic machine in its class
  • Best designed for the quick cutting of cores into pieces of various lengths from a given parent core
  • The HSS cutter gives fast and sharp cutting with added life
  • Both 3" & 6" core cutting option is also available
 

Pneumatic Core Cutter

  • heavy fabricated structure.
  • pneumatic cylinder for multiple slices.
  • 1hp standard make motor
  • control switch.
 

Doctoring Rewinding Machine

Accu doct is basically used for salvaging the damaged roll and it gives the shear winding for all kind of packaging industries. Doctoring rewinder is also used for inkjet printing / batch coding on printed and laminated pouches.

ACCU SEVO INSPECTION CUM REWINDER (DOCTORING M/C )

The rewinding machine ACCU- DOCT is a machine designed for the recovery of section of defective material (printing, laminating defect or other similar defects).this machine also used for ink jet printing

  • Plc base servo motor and servo drive for unwind and rewind
  • Load cell feedback for unwind and rewind
  • Digital length counters cum speed indicator.
  • Servo motor for linear actuator of edge /line guiding system
  • Main drive with servo (nip)

The rewinding machine is suitable for plastic films also coupled paper and aluminums.

  • WORKING WIDTH :    UP TO 500MM
  • UNWINDING  :    600/800/1000MM
  • REWINDING :    UP TO500
  • MAX WORKING SPEED :    100 TO 300 MT/MIN
 

Inkjet Printing Rewinder

Accu inkjet rewinder machine is specifally design for the inkjet printing industry for all kind of materials. Highly used in mnc companies for inkjet of mrp/batch no/lot no/ pkd date etc.

Machine consisting with

  • Cantilever unwind
  • Separate unwind structure with edge guiding (web aligner)
  • Electronic 2hp ac drive drive & motor with gear box
  • Mechanical brake arrangement for unwind
  • Inspection table made from s.s. plate
  • Easy material feeding

Features

  • Ultrasonic electronic web guiding sustem
  • Motorized auto tension controls
  • 4 Drive for unwind nip unit and 2 rewinder with auto tension control.
  • Stroboscope
  • Videoscope
  • Inkjet printer (markem-imaje /video-jet / hitachi / domino’s)
  • Online drying system
  • Online printing assembly
  • Mechanical /air expanding shaft for unwind rewind
  • Trim injector system
  • Plc controller with computer interface
 

Inkjet Print Rewinding Machine

Accu inkjet rewinder machine is specifally design for the inkjet printing industry for all kind of materials. Highly used in mnc companies for inkjet of mrp/batch no/lot no/ pkd date etc.

Machine consisting with

  • Cantilever unwind
  • Separate unwind structure with edge guiding (web aligner)
  • 5kg Magnetic Powder Break
  • load cell tension Control
  • Air shaft 3"
  • 3 Drive 2+1 synchronization
  • Inspection table made from s.s. plate
  • Easy material feeding

Features

  • Ultrasonic electronic web guiding sustem
  • Motorized auto tension controls
  • 4 Drive for unwind nip unit and 2 rewinder with auto tension control.
  • Stroboscope
  • Videoscope
  • Inkjet printer (markem-imaje /video-jet / hitachi / domino’s)
  • Online drying system
  • Online printing assembly
  • Mechanical /air expanding shaft for unwind rewind
  • Trim injector system
  • Plc controller with computer interface